Having a flat tire on your BOB Stroller can put a damper on any outing with your little one.
But fear not, because replacing the tire is easier than you might think!
In just a few simple steps, you can have your stroller rolling smoothly once again.
So grab your tools, put on your DIY hat, and prepare to conquer the world of stroller tire replacement!
How to replace the Bob stroller tire?
To replace a Bob stroller tire, you will need a compatible tire or tube, a tire pump, two flathead screwdrivers, and safety glasses.
To remove the rear wheel, disengage the parking brake, open the quick-release lever, and remove the wheel.
For the front wheel, lock the swivel feature forward, open the quick release lever, unthread the nuts, and remove the wheel.
To remove the inner tube and tire, deflate the inner tube and gently separate the tire from the wheel using screwdrivers.
Work around the tire until it is removed and then gently remove the inner tube between the tire and the wheel.
Pull the tire completely off the wheel rim.
To install the new tire and inner tube, inspect the tire for foreign objects and remove them.
Place the tire over the wheel rim and use a screwdriver to work the tire over the wheel.
Inflate the inner tube slightly until it forms into shape and then re-seat the inner tube inside the tire.
Align the valve over the hole in the wheel and push through.
Starting at the valve, re-seat the second edge of the tire over the wheel rim, working your way around until it is complete.
Use a flat edge tool if necessary.
Re-inflate the tube to the recommended pressure, replace the valve cap, and re-install the wheel on the BOB stroller, ensuring the quick release lever is engaged.
Key Points:
- Gather necessary tools: compatible tire or tube, tire pump, two flat head screwdrivers, and safety glasses
- Remove rear wheel by disengaging parking brake, opening quick release lever, and taking off the wheel
- Remove front wheel by locking swivel feature forward, opening quick release lever, unthreading nuts, and removing wheel
- Deflate inner tube and separate tire from wheel using screwdrivers
- Take tire completely off wheel rim
- Install new tire and inner tube by:
- Inspecting tire for foreign objects
- Placing tire over wheel rim
- Inflating inner tube slightly
- Re-seating inner tube inside tire
- Aligning valve over hole in wheel
- Re-seating second edge of tire over wheel rim
- Using a flat edge tool if necessary
💡 Did You Know?
1. The first jogging stroller, known as the “BOB Revolution,” was actually invented by a man named Philip Novotny, hence the name “BOB” (short for “Best of the Best”).
2. The tires of a BOB stroller are designed to be replaced individually, which means you don’t have to replace the whole wheel if only one tire is damaged.
3. To replace a BOB stroller tire, start by deflating the tire fully. Then, use a small pry tool or flathead screwdriver to gently separate the tire bead from the wheel rim, working your way around until it slips off.
4. When choosing a replacement tire for your BOB stroller, consider opting for a puncture-resistant tire made from materials like Kevlar. This can help prevent future flats during your stroller rides.
5. Some avid outdoor enthusiasts who use BOB strollers for off-road adventures have taken to swapping the front-wheel tire with a fat bike tire for improved traction and stability on challenging terrains. Remember, this modification might not be suitable for everyone, so always prioritize safety and manufacturer recommendations.
Tools Needed For Replacing Bob Stroller Tire
When replacing the tire on your BOB stroller, it is important to have the right tools on hand for a smooth and successful process. Here are the tools you will need:
1. Compatible tire or tube: Before beginning the replacement process, ensure you have a compatible tire or tube that matches the specifications of your BOB stroller. This will ensure proper fit and performance.
2. Tire pump: A tire pump is necessary to inflate the new inner tube and tire to the recommended pressure. Make sure you have a pump that is suitable for stroller tires.
3. Two flat head screwdrivers: These will be useful when removing the tire and inner tube from the wheel. Use them gently to separate the tire from the wheel rim without causing any damage.
4. Safety glasses: It is always a good idea to wear safety glasses when working with tires and inner tubes. This will protect your eyes from any flying debris or potential accidents during the replacement process.
- Compatible tire or tube
- Tire pump
- Two flat head screwdrivers
- Safety glasses
Removing The Rear Wheel
To replace the rear wheel on your BOB stroller, follow these steps:
1. Disengage the parking brake: Make sure the parking brake is fully disengaged to facilitate wheel removal.
2. Open the quick release lever: Locate the quick release lever on the rear wheel axle and open it to release the wheel from the stroller frame.
3. Remove the wheel: With the quick release lever open, pull the rear wheel away from the stroller frame.
- Lastly, remember to securely reattach the new wheel by following the reverse order of these steps.
Note: It is important to double-check the attachment to ensure the wheel is properly secured.
Removing The Front Wheel
If you need to replace the front wheel of your BOB stroller, follow these steps:
- Lock the swivel feature forward: Before removing the front wheel, make sure to lock the swivel feature in the forward position. This will help stabilize the stroller during the replacement process.
- Open the quick release lever: Locate the quick release lever on the front wheel axle and open it to release the wheel from the stroller frame.
- Unthread the nuts: Once the quick release lever is open, you will need to unthread the nuts that secure the wheel onto the axle. Take note of the specific nut design of your BOB stroller as it may vary.
- Remove the wheel: After unthreading the nuts, you can now remove the front wheel by pulling it away from the stroller frame.
Removing The Inner Tube And Tire
When it’s time to replace the inner tube and tire on your BOB stroller, follow these steps to successfully remove the old ones:
- Deflate the inner tube: Use a tire pump or any suitable tool to completely deflate the inner tube. This will make it easier to remove it from the wheel.
- Gently separate the tire from the wheel: Take two flat head screwdrivers and insert them between the tire and wheel rim. Apply gentle pressure and work your way around the tire, gradually separating it from the wheel.
- Remove the inner tube: Once the tire is loosened, carefully remove the inner tube by gently pulling it out from between the tire and wheel.
- Pull the tire off the wheel rim: With the inner tube removed, continue working around the tire until it is completely off the wheel rim. Take your time to avoid any unnecessary damage.
Installing The Tire And Inner Tube
After removing the old tire and inner tube, you are now ready to install the new ones. Here’s how you can do it:
- Inspect the tire for foreign objects: Before installing the new tire, thoroughly inspect it for any foreign objects such as nails, glass, or thorns. Remove any debris to ensure a smooth and safe ride.
- Place the tire over the wheel rim: Position the new tire over the wheel rim, ensuring that it is properly aligned.
- Use a screwdriver to work the tire over the wheel: Starting at one side of the tire, use a screwdriver to gently work the tire over the wheel rim. Take your time and work your way around until the tire is securely in place.
Inflating And Re-Installing The Wheel
Replacing the Tire on a BOB Stroller
To replace the tire on your BOB stroller, follow these step-by-step instructions:
- Inflate the inner tube slightly: Before fully inflating the inner tube, inflate it slightly until it begins to take shape. This will help position the tube properly within the tire.
- Resit the inner tube inside the tire: Ensure that the inner tube is properly positioned inside the tire, aligning the valve over the hole in the wheel rim. Gently push the valve through the hole.
- Resit the second edge of the tire over the wheel rim: Starting at the valve, resit the second edge of the tire over the wheel rim. Work your way around the tire until it is completely seated on the wheel rim.
- Use a flat edge tool if necessary: In some cases, you may need to use a flat edge tool to work the last bit of the tire over the wheel rim. Be careful not to damage the tire or tube during this process.
- Re-inflate the tube to the recommended pressure: Using a tire pump, inflate the inner tube to the recommended pressure indicated by the manufacturer. This information is often found on the sidewall of the tire.
- Replace the valve cap: Once the tube is properly inflated, don’t forget to replace the valve cap to protect it from dirt and debris.
- Re-install the wheel on the BOB stroller: With the tire properly inflated, re-install the wheel onto the BOB stroller. Ensure that the quick release lever is engaged to securely hold the wheel in place.
By following these instructions, you will be able to replace the tire on your BOB stroller easily, ensuring comfortable and safe rides for you and your little one.
FAQ
Why are BOB strollers discontinued?
After discovering 200 consumer complaints about the front wheels of BOB strollers spontaneously falling off and resulting in injuries, the company made the decision to discontinue the strollers. The culprit was identified as the quick-release lever that failed to secure the wheel properly to the front fork. This issue, causing harm to both parents and children, forced BOB to cease production and prioritize the safety of their customers, leading to the discontinuation of the strollers for further reevaluation and improvements.
What size tires are on Bob strollers?
The Bob strollers come with 12.5″ tires, although they are referred to as 12″ tires. It is important to note that these tires are compatible with all Bob stroller models that have 12″ wheels. However, the inner tube, which holds the air and shape of the tire when inflated, needs to be purchased separately.
What stroller did Meghan Markle use?
Meghan Markle, a known advocate for the Bugaboo brand, relied on the Bugaboo Ant stroller for both of her children. Renowned for its lightweight and compact design, the Bugaboo Ant provided Meghan with a convenient and maneuverable option. With its sleek features and practicality, it’s no wonder why Meghan Markle chose this stroller for her little ones.
What is the recall on Bob tires?
There is currently no information available regarding a recall on Bob tires. However, it is important for consumers to note the recall regarding the modified thru-bolt axle used with BOB Jogging Strollers made between 1/1/2009 to 9/30/2015. It is advised that consumers stop using the modified thru-bolt axle installed on the front wheel of their BOB jogging stroller for safety reasons.
